![]() This channel supports adjusting the zone color temperature from cold (0%) to warm (100%). This channel supports adjusting the color temperature from cold (0%) to warm (100%). This channel represents signal strength with values 0, 1, 2, 3 or 4 0 being worst strength and 4 being best strength. Note: IR capable lights only activate their infrared LEDs when the brightness drops below a certain level. This channel supports adjusting the infrared value. This channel supports starting and stopping the HEV clean cycle. This channel represents a type of light effect (e.g. This channel supports full zone color control with hue, saturation and brightness values. ![]() This channel supports full color control with hue, saturation and brightness values.Ĭolorlight, colorhevlight, colorirlight, colormzlight, tilelight This channel supports adjusting the brightness value. This channel supports adjusting the zone color temperature in Kelvin. This channel supports adjusting the color temperature in Kelvin.Ĭolorlight, colorhevlight, colorirlight, colormzlight, tilelight, whitelight Thing lifx :colorirlight :porch # ChannelsĪll devices support some of the following channels: Channel Type ID However, in the thing file, a manual configuration looks e.g. The device ID is printed as a serial number on the light and can also be found within the native LIFX Android or iOS application.īut usually the discovery works quite reliably, so that a manual configuration is not needed. # Thing ConfigurationĮach light needs a Device ID or Host as a configuration parameter. The binding is NOT able to add or detect lights outside the network. Note: To get the binding working, all lights must be added to the WLAN network first with the help of the LIFX smart phone applications (opens new window). The binding is able to auto-discover all lights in a network over the LIFX UDP protocol. The following matrix lists the capabilities (channels) for each type: Thing Type The thing type determines the capability of a device and with that the possible ways of interacting with it. The following table lists the thing types of the supported LIFX devices: Device Type ![]() This binding integrates the LIFX LED Lights (opens new window).Īll LIFX lights are directly connected to the WLAN and the binding communicates with them over a UDP protocol.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |